Users Manual Part 3

(TRIM DIAL screen)
(HOME screen)
MENU-1
MENU-2
MENU-4
(MENU 3)
Select
" T R I M D I A L"
67
Function
*Function selection
*Step amount set-
ting
*Direction of oper-
ation setting
Function Select Trim Dial "TRIM DIAL"
Select TRIM Dial Function "TRIM DIAL"
Selection of the function to be performed by trims and dial (DT1, DT2, DT3, DT4,
DT5, DL1).
- The functions that can be assigned to dial and digital trim are listed on the next page.
- The dial and digital trim step amount can be adjusted (The relationship between set value and
step amount is shown in the table on the next page.).
- The operation direction can be reversed (NOR/REV).
1
(Setting trim/dial selection)
Select the trim or dial you want to set by moving the (JOG)
button up or down.
2
(Function setting)
Select the function with the (+) or (-) button.
- Refer to the list on the next page for the abbreviations of the functions.
(Step amount setting)
Select the step amount you want to set by moving the (JOG)
button up or down. Use the (+) or (-) button to set the step
amount.
- Refer to the next page for the relationship between set value and step amount.
(Changing the direction of operation)
Select the direction of operation you want to set by mov-
ing the (JOG) button up or down. Use the (+) or (-) button to
trim/dial the direction.
3
When finished with setting, return to the MENU screen by
pressing the (END) button.
Function select trim/dial setting
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
Display
"
TRIM DIAL
"
screen using the following method: