User Manual

The second chapter Use of RFID demonstration
2.1 UHF Card Issuer System architecture:
UHF Card Issuer via USB/RS232 Serial interface is connected to a PC, UHF Card Issuer using a USB power
supply directly; With the corresponding Demo software can operate to read labels and so on; If you need more detailed
UHF issuing organ and
the PC communication protocols, please refer the documentation “communication protocols”, System architecture signal
as shown in the below:
System architecture diagram
2.2 Presentation tools
Name Specifications Number
UHF Card
Issuer
100mm*62mm*18mm 1
USB lime USB to Mini 1
Label UHF some
computer / 1
2.3 Install the USB driver
1. Right click on the “my computer” choose “management” options → click “Device Manager” and click on the
“other devices” drop-down box; As shown in figure2.1:
Figure 2.1
2. Double-click in the “other devices” drop-down box to choose “HARVEMAC” option → click the “reinstall driver” →
check “from the list, or specify the location to install (high Level)” option → click “next” button → click “browse”
button to select store path of “ uhf_usb_driver ” file → click “next” button.
Install the USB driver to install the driver after the completion of the click “finish” button to close
the wizard; Operating procedures are shown in figure 2.2 below:
UHF Card Issuer
USB
RS232
UHF
RFID label
Computer/Industrial