User Manual

3. See computer port number :right-click on the “my computer” icon to click to choose “management” option, →click
select “device manager” options→ click “port (COM and LPT)”option drop-down box view of “communication
port(COM)”;In order to enter 2.4 as shown in the following interface:
Figure 2.4
4. Set equipment port (The port must be same of computer): use “notepad” opened the way to open
“RFIDcomm.cfg”document→Settings equipment port (The port must be same of computer); In order to enter the
following interface is shown in figure 2.5 (set successfully save it, close the text box):
Figure 2.5
5. After setting the “COM”, click in the interface is shown in figure 2.1“
UHFDemoV1.76.2.exe”software; Into
the following basic operation is shown in figure 2.6 interface：