Instruction Manual

10 Thomas, Irvine, CA 92618 USA T (949)-465-0900 F (949)-465-0905 [e-mail] www.futek.com/support/IHH200
IHH200 Manual 2.5 - Page 14
Parameter
Set-Up Information
ENABLING TEDS DISABLES CALIBRATE MENU
Press to skip this parameter and exit menu.
Press to enable or disable TEDS.
If you have chosen to enter the TEDS calibration, EnAbLEd? appears.
If you have chosen to enter the TEDS you will be prompted whether you want to select
EnAbLEd? If you do not press , press . If you have selected enabled, two
flashing indicators will appear.
For more detailed TEDS calibration information, please refer to the TEDS section of the
manual.
tedS