PRODUCT INFORMATION SHEET Flexible Polyurethane Foam Future Foam’s family of polyurethane foam products consist of polyether and polyester urethane polymers ranging in density from one (1) pound to six (6) pounds per cubic foot. They are 90+% polyurethane polymer. Depending upon the product the balance consists of combustion modifiers and/or fillers.
Storage areas should be protected by a sprinkler system meeting insurance, NFPA and/or local codes. These products are considered stable under ordinary conditions of use and storage and hazardous polymerization is not known to occur. Elevated storage temperatures, oxidizing agents, heat, flames, ignition sources, fluorine and fluorine/oxygen mixtures, burning cigarettes, space heaters, naked lights, exposed wiring or other ignition sources should be avoided.
Clean Air Act: The products do not contain any Class 1 or Class 2 Ozone Depleters. Clean Water Act: These products are not listed as Hazardous Substance under CWA. These products do not contain any chemicals listed as priority or toxic pollutants under the CWA. Resource Conservation and Recovery Act: If the product becomes a waste, it is not a hazardous waste as defined by the Resource Conservation and Recovery Act (RCRA) 40 CFR 261.
Consumer Products Safety Improvement Act (CPSIA): Future Foam does not knowingly add to its foam products any lead or lead compounds or phthalates listed in the act. Toxic in Packaging: The regulated metals (lead, mercury, cadmium, and hexavalent chromium) are not used to produce these foam products. This information is furnished in good faith, without warranty, expressed or implied, except that it is accurate to the best knowledge of Future Foam, Inc.