Owner's manual

SPECIFICATIONS
WIRING
All DB-25 connectors are for use with standard D-sub 8-channel snakes. Use high-quality audio cables
whenever possible.
DB-25 wiring for SUMMING IN 1-8 connector
CHANNEL SHIELD +SIGNAL -SIGNAL
1 25 24 12
2 11 10 23
3 22 21 9
4 8 7 20
5 19 18 6
6 5 4 17
7 16 15 3
8 2 1 14
DB-25 wiring for SUMMING IN 9-16 connector
CHANNEL SHIELD +SIGNAL -SIGNAL
9 25 24 12
10 11 10 23
11 22 21 9
12 8 7 20
13 19 18 6
14 5 4 17
15 16 15 3
16 2 1 14
DB-25 wiring for BUSS IN/OUT 1-4(5-8) connectors
CHANNEL BUSS
INSERT
SHIELD +SIGNAL -SIGNAL
1 1(5) LEFT 25 24 12
2 1(5) RIGHT 11 10 23
3 2(6) LEFT 22 21 9
4 2(6) RIGHT 8 7 20
5 3(7) LEFT 19 18 6
6 3(7) RIGHT 5 4 17
7 4(8) LEFT 16 15 3
8 4(8) RIGHT 2 1 14
XLR jacks wiring:
PIN 1 = Ground
PIN 2 = Positive (HOT)
PIN 3 = Negative (COLD)
Instrument jacks wiring:
TIP = Positive (HOT)
RING = Negative(COLD)
SLEEVE = Ground
Headphone jack wiring:
TIP = Left channel
RING = Right channel
SLEEVE = Ground
INPUTS
2 Microphone (XLR)
2 Instrument (1/4”)
16 Summing (DB-25)
8 Stereo buss proc
essors (DB
-
25)
SIGNAL LEVELS:
> +28dBu
AC POWER INPUT: 115V/230V ~ 50-60Hz
AC POWER CONSUMPTION: 400mA current
FUSES: 250V 1Amp fast blow
DIMENSIONS: 15”(L) x 19”(W) x 3.5”(H)
WEIGHT: 12.5 lbs.
OUTPUTS
8 Stereo buss processors (DB-25)
2 Record (XLR)
6 Monitor (XLR)
1 Headphones (1/4”)
3