Owner Manual Manual

SEQUENCER OPERATIONS

TRANSPOSING A SONG STEP

The pattern for each song step can be transposed up or down 36 half-steps in pitch from the notes

originally programmed into that pattern.

To transpose a song step, select the song step and then press the Xpose/Paste key. While holding the

Xpose/Paste key, the display will show the current transpose setting for that step’s pattern. Use the

Up/Down keys to change the transpose setting for that song step. Release the Xpose/Paste key when

you are done and the sequencer will automatically save your changes.

To reset the transposition to a value of 0 for all the song steps, press and hold the Shift/Clear key,

then press the Xpose/Paste key. This will allow all of the patterns in the song to play at their original

programmed pitches.

SETTING THE LOOP POINT FOR A SONG

A loop point is recorded into a song step to indicate this will be the last step played before the

sequencer goes back to the beginning of the song and starts playing it again. If you want to find what

song step is set to loop, you can use the Up/Down keys to step through the song and see which step is

set to loop. This is indicated by the Loop key indicator being on for that step of the song.

To set a loop point for a step, use the Up/Down keys to first select that step and the press the Loop

key. In the same way, if you wish to remove a loop point from a song step, simply press the Loop key

to remove the loop point. You may also clear all of the loop points from a song by pressing and

holding the Shift/Clear key, and then pressing the Loop key. This will be most useful when creating

new songs rather than finding the existing loop points one at a time and clearing them out.

All changes you make to the loop point settings are automatically saved by the sequencer.

SETTING A SONG’S TEMPO

Each song records the tempo it will play back at. Select the song you wish to change the tempo of,

and then press the Swing/Tempo key. As you hold the Swing/Tempo key the display will show the

current tempo setting. Using the Up/Down keys you can change the song’s tempo from 20 to 250

beats per minute B.P.M.. Once the tempo is correct, release the Swing/ Tempo key and the sequencer

will automatically save your changes.