Owner Manual User guide

THEME

In the Theme mode, you set counters, or select outputs of the shift

The output of source 1 and 2 are fed to one logic gate, while source 3

and 4 are fed to another logic gate. The output of these two logic gates

will be feed a third logic gate, and the output of this third logic gate is the

parity bit that feeds the input of the shift register.

This is where an algorithm can become quite complex, as any sources

relying on the shift register become interactive with changes made to the

Theme. And since sources for the Theme can be outputs of the shift

intelligence of its own.

Experiment with various settings for sources 1, 2, 3 and 4 to create

complex patterns within the Theme.