Owner Manual User guide

SHIFT REGISTER
The 32-bit shift register can be used as a source of logic for the Melody,
Rhythm, Velocity, and Theme.
While in the Shift Register mode, the top line of the display will show the
current state of logic data as it moves through the shift register. However
this portion of the display will be blank when the sequencer playback is
stopped as no data is moving through the shift register.
Shift register outputs 1 – 32 are shown from respectively from left to right
in the display.
Soft keys 1 – 4 can each be set to a value from 1 – 36. This value
represents one of the 36 different parity types. These parity types are all
possible combinations of logic gates to transform 4 bits of logic into a
single output that then feeds the input of the shift register.
Experiment with different parity type values to see how this affects logic
being fed into the shift register.