Owner Manual User guide

TROUBLESHOOTING PLAYBACK
If you are experiencing problems playing an external sound module
check the following:
• Is the BPM LED blinking? If not, the Zillion is not playing.
• Is the Zillion set to external sync and waiting for the master clock to
begin playback?
• Check to make sure the MIDI OUT of the Zillion is connected to the
MIDI IN of the sound module you want to play.
• Try using a different MIDI cable. Occasionally MIDI cables do fail.
• Make sure the MIDI OUT channel of the Zillion, and the MIDI IN
channel of the sound module are set to the same value.
• Make sure the volume is turned up on your sound module, and that it
is properly connected to your mixer, audio interface, or sound
system.