Installation Instructions
Table Of Contents
- Document Revisions
- Notes, Attentions, Important
- RF Exposure Label
- FCC Label
- Installation Requirements for Compliance with Radio Frequency (RF) Energy Exposure Safety Standards
- Table 5A Approved 800 DVRS Configurations – APX6500 / APX7500
- Table 5B Approved 700 DVRS Configurations – APX6500 / APX7500
- Table 5C Approved UHF R1 DVRS Configurations – APX6500 / APX7500
- Table 5D Approved UHF R2 DVRS Configurations – APX6500 / APX7500
- Table 5E Approved UHF R3 DVRS Configurations – APX6500 / APX7500
- Table 5F Approved VHF DVRS Configurations – APX6500 / APX7500
- Table 6A Approved 800 DVRS Configurations – APX8500
- Table 6B Approved 700 DVRS Configurations – APX8500
- Table 6C Approved UHF R1 DVRS Configurations – APX8500
- Table 6D Approved UHF R2 DVRS Configurations – APX8500
- Table 6E Approved UHF R3 DVRS Configurations – APX8500
- Table 6F Approved VHF DVRS Configurations – APX8500
- Antenna Installation Instructions
- Mobile Radio / DVR Antenna separation
- Fixed DVRS Site Antennas
8F083X03 Rev 13
DVRS-Product Safety and RF Exposure Booklet 3
Product Safety and RF Energy Exposure Booklet for
Digital Vehicular Repeater Systems (DVRS)
ATTENTION!
Before using this equipment, please read this booklet which contains
important operating instructions for safe usage, RF energy control and
compliance with FCC/ISED exposure limits.
Notes, Attentions, Important
Throughout this manual, you will see Notes, and Attentions, Important
Their meaning is as follows:
NOTE
A clarifying statement that expands on the text that follows.
IMPORTANT
An important statement that should be considered and / or implemented in order to achieve
adequate equipment operation.
ATTENTION!
An instruction that must be followed in insure compliance with the appropriate standards or proper
equipment operations
NOTE:
This equipment has been tested and found to comply with the limits for Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the installation manual, may cause harmful
interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.