Installation Manual

Futuro Futuro
Installation Instructions
Futuro Futuro
REMOTE BLOWER KIT
Range hood accessory
INSTALLATION INSTRUCTIONS - REMOTE BLOWER KIT
ISTRUZIONI MONTAGGIO - ASPIRATORE SOTTOTETTO
STEP 1 STEP 2 (optional)
Remove metal filters. Remove carbon filter (if present).
STEP 3 STEP 4
Duct Collar Adapter
A.) Disconnect the 6-pin plug from the blower.
B.) Using a long Philips (cross) screwdriver, remove
the 4 screws holding the blower motor inside the
Remove the Duct Collar Adapter included with the
blower chamber.
Remote Blower Kit, and install it in the blower chamber
NOTE: do NOT remove the (white plastic) blower
inside the range hood, to replace the blower output
chamber itself.
collar.
STEP 5 STEP 6
Connect the 21-foot extension cable to the 6-pin plug in
Install the Remote Blower Kit in an accessible indoor
the range hood, and connect the 3-pin power cord to a
location (in the attic, between the joists, under the
standard 110-volt outlet. Please note: the outlet should
eaves, etc.) Please note: the Remote Blower Kit is
be on a separate, dedicated line, not shared with other
NOT rated or designed for outdoor installation.
appliances, dimmable lights, or GFI outlets.
CORRECT -
Installed in
INDOOR location
INCORRECT -
Do NOT install in
OUTDOOR location