Futuro Futuro Designer Range Hood Installation & User’s Manual model: 21" Dome Black Island 21" Dome Iron Island 21" Dome White Island 21" Dome Brass Island 21" Dome Copper Island www.futurofuturo.
Overall Dimensions 10 3/4" Includes 6 x 43" long strings. Min usable length 15 3/4" Max usable length 40 1/2" (after mounting) Optional longer mounting strings are available under "Accessories" tab on this product page. Max usable length 11'2 (after mounting). 15 1/2" Customer-supplied longer wires can be substituted to accommodate any ceiling height / shape (sloped). 21 1/2" 0. 62 ” Support bracket A 45° 0.73” 0.85” 6.53” C A A B 0.79” 6.
Installation measures Includes 6x43" long wires. Min usable length 15 3/4" Max usable length 40 1/2" (after mounting) H1 28” (710mm) Optional longer mounting strings are available under "Accessories" tab on this product page. Max usable length 11'2 (after mounting). Support cables Customer-supplied longer wires can be substituted to accommodate tall ceilings.
Ceiling installation of the fixing bracket N O R F Ø8 T Ø8 Ø8 Ø8 mm L 5 N 4 2 1 T 3 F R O N 6 4 5 6 T 1 R O N 2 F 3
Support wire locking A C B 4 5 3 6 2 1
Electrical connections and closing cover fastening 1 2
SAFETY INSTRUCTIONS AND WARNINGS Installation operations are to be carried out by skilled and qualiied installers in accordance with the instructions in this booklet and in compliance with the regulations in force. DO NOT use the hood if the power supply cable or other components are damaged: disconnect the hood from the electrical power supply and contact the Dealer or an authorised Servicing Dealer for repairs. Do not modify the electrical, mechanical or functional structure of the equipment.
ELECTRICAL CONNECTION (only intended for qualiied personnel) Disconnect the equipment from electrical mains power supply before carrying out any operations on the hood. Ensure that the wires inside the hood are not disconnected or cut: in the event of damage, contact your nearest Servicing Department. Refer to qualiied personnel for electrical connections. Connection must be carried out in compliance with the provisions of law in force.
USING THE RADIO CONTROL 2B„ … ASSOCIATING THE RADIO CONTROL WITH THE HOOD USING THE ROTARY CONTROL WARNINGS!: Place the hood away from sources of electromagnetic waves (e.g. microwave ovens), which could interfere with the radio control and with the hood electronics. The maximum operating distance is 5 metres, that may vary according to the presence of electromagnetic interferences. Radio control operated at 433.92MHz.
METAL ANTI-GREASE FILTERS LIGHTING It is advised to frequently wash the metal ilters ( at least once a month) leaving them to soak in boiling water and washing up liquid for 1 hour, taking care not to bend them. Do not use corrosive, acid or alkaline detergents. Rinse them well and wait for them to be completely dry before reassembling them. They are dishwasher safe. To extract and insert the metal anti-grease ilters see the picture.