Control Panel Functions
EN - 10
CARE & MAINTENANCE
Before cleaning or maintenance, disconnect the power to the range hood. These
general instrucons apply to the vast majority of range hoods. Certain specic mo-
dels may include addional cleaning or operang instrucons, as detailed in their
model-specic manual.
CLEANING RANGE HOOD BODY:
Stainless-steel range hoods should be cleaned with a non-abrasive cleaner, such as
WD-40. Models that feature enamel nish, or glass surfaces, should be cleaned
with a non-abrasive glass cleaner, or a warm moist dish cloth. Do not use abrasive
substances, such as stainless steel polishes, cleaning powders, scrubbing sponges,
or steel wool.
CONDENSATION:
It’s generally recommended to turn on the range hood a few minutes before coo-
king, in order to establish airow and prevent condensaon from the hot steam
hing the cold surface of the range hood. It’s also recommended to use the De-
layed Shut-O feature (10-minute mer), so that any moist air remaining in the
hood or ductwork is completely expelled.
Another cause for condensaon could be improper duct size or blockage. If con-
densaon occurs regularly, or if you feel air coming out of the range hood
(backdra), denitely check the ductwork to ensure it’s at least the same or larger
diameter as the blower output, not blocked, and that the backdra / louvers on
the end-cap is opening easily.
LIGHTS REPLACEMENT
LED LIGHTING:
Under normal operang condions, LED lights generally don’t require replace-
ment. However, in the rare that an LED light xture needs to be replaced, the re-
placement should be conducted only by a technician using original replacement
parts.