Face recognition debugging operation manual 1, equipment wiring instructions 2, device management background settings - local debugging tools (1) confirm that the device is in the same LAN as the management computer, and the IP address of the input device in the browser (such as device lip: 192.168.1.189, input 192.168.1.189).
Note: Google Chrome is recommended Account: admin Password: 123456 4, general parameters Users can customize the device name and device content.
5, network parameters - configure device access (1) Cable network connection <1>dhcp open: automatically configure network IP and other information; <2>dhcp shut down: manually configure network IP and other information, and refer to computer network parameters in detail. (2) Wireless network connection Hot shutdown, wired network DNS delete, input can use WiFi name and password, pay attention to the same case.
6, cloud parameters - configuring cloud platforms and docking on devices Main parameters: cloud push mode and push address. Face recognition cloud platform: Push mode (WEBSOCKET) and push address (ws://yun.fuyingkeji.com/webfnzn/face/fyface) (2) wireless network configuration: you must select "hot shutdown", enter the fixed Internet WiFi name and password (DNS delete the wired connection parameter).
stranger identification 5
time: 0-3 seconds.
9, voice parameters - configure device voice content parameters Volume: 0-10,0 minimum, 10 maximum; Editable content is customizable to modify broadcast voice. 10, video image parameters - configure device image parameters The above content can be maintained by default. If necessary, please contact the technology.
11, device interface parameters - configure device additional function parameters This content is related to technical adjustment. 12, control command - device firmware parameters Upgrading firmware: uploading.
packages, prompting web pages to appear after upgrading, clearing up registration information: clearing personnel sent to equipment; Clear the traffic record: clear the record data of equipment identificatio 13, application scenario - device application scenario configuration No temperature measurement: general mode; temperature measurement: face temperature measu 9
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.