User's Manual

STG-1213 Manual
3. Replace battery cover and securely screw the cover into place.
Do not overtighten the screw.
Slim Receivers
Each slim receiver uses one CR2032 button cell battery( included) .
1. Pull out the battery door (the colored area).
2. Install the supplied battery into each slim receiver, ensuring the
"+" side of the battery is facing up.
3. Replace battery cover. Make sure it dicks into the main body.
Transmitter
uses 2 AAA batteries (not included).
1. Grasp the upper and lower sections of the transmitter and firmly
pull them apart to access the battery compartment.
2. Install 2 AAA batteries into the transmitter. Be sure the polarity
(+/-) of the batteries matches the directions in the compartment.
Low Battery Warning
When the battery becomes depleted the key ring receiver/slim
receiver beeps three times per minute to remind you to change the
battery.
Using the Slim Receiver
1. Attach a colored slim receiver to an object you easily misplace.
2. Press and hold the appropriate color-coded button on the
transmitter for five seconds.
3. If the slim receiver is in range (60 feet), it emits an audible beep.
4. If no beep is heard,change you location and press and hold the
color-coded button again for fives seconds.