User Manual

3390TX (W6) Manual
Page| 13
Month: Defned by Calendar Month i.e. January 1 - January 31
Year: Defned by Calendar Year i.e. January 1 - December 31

In the mode of viewing wind speed history, press and hold the “ ” button for 3 seconds to clear all history of wind speed.
Note: Wind speed reading will reset to current wind speed.
Note: After 20 seconds without pressing any button or touch the “ ” location button at any time to exit the view
mode.
Rain Readings | History

In the main display interface, press and hold the “ ” button for 3 seconds to convert the display to cumulative value of
rainfall or rate of rainfall
Note: Rainfall: from current to past (1 hour | 24 hours | day | 7 days | month | year | total) total accumulated rainfall
Rainfall rate: average rainfall over the past 12 hours per hour

Press and release the “ ” button to view the rain history
Note: NOW: cumulative value over the past 30 minutes
HOUR: cumulative value over the past 60 minutes
24 HOURS: The cumulative value of the past 24 hours.
DAY: 24 hr period from 0:00 – 23:59(12:00am - 11:59pm). Cumulative value with today
7 DAYS: In the past 7 days, the cumulative value of the last record begins
MONTH: The cumulative value defined by the calendar month (ie January 1st - January 31st).
YEAR: The cumulative value is determined by the calendar year, from January 1 to December 31.
TOTAL: The cumulative value of the total run time (no time stamp) since the weather station was started

In the mode of viewing rain history, press and hold the “ ” button for 3 seconds to clear all history of rain.
Note: The rain reading will reset to 0 mm (in).
Note: After 20 seconds without pressing any button or touch the “ ” location button at any time to exit the view
mode, The weather station will resume normal time display and display the last rainfall record you viewed.
When the rain shows the rain rate before entering the observation mode, it still shows the rain rate when
returning from the observation mode to the normal time display.
Wireless sensor connection

The weather station can connect up to 1 Multi-combination wireless sensor and 3 different channels of temperature |
humidity wireless sensor,

The weather station automatically searches for all wireless sensors within 3 minutes of power-on and registers the
sensor IDs. Each sensor generates a random ID after power-on to distinguish the sensors.

In the main display interface, press and release the “ ” button to view the value of the wireless sensor on the different
channels.
Note: In view mode, the ID of the wireless sensor can be displayed.

The temperature/humidity data of the additional channel wireless sensor needs to be displayed on the normal time
display interface. After selecting the channel in the viewing mode, touch the “ ” location button to exit the viewing
mode.
Note: The temperature and humidity values   shown in the OUTDOOR REMOTE column after exit are the
selected channels. At the same time, in the channel icon (displaying the position of A15), the number of
channels is displayed: OUTDOOR (representing Multi-combination wireless sensor) | 1 or 2 or 3 (representing
3 channels of temperature | humidity wireless sensor))