User's Manual

EM2245Manual
 When you insert the batteries, all the icon on the LCD display will briefly light up for 3 seconds, and you will
hear a beep tone, 3 seconds later, automatically into the working mode.
 Locate the temperature sensor jack on the right side of the Transmitter.Insert the meat temperature sensor
into the jack.
TO SELECT MEAT TYPE AND TASTE LEVEL
 Press ”MEAT” button to navigate and select the desired meat types.
 Each press will change the display in the following sequence:
BEEF LAMB VEAL HAMBURGER PORK TURKEY CHICKEN FISH PGM
 Press “TASTE” button to select the doneness level (Rare, Medium Rare, Medium, Medium Well or Well Done).
The target temperature appears on the LCD screen.
 When the meat type selection in PGM, press “∧” and “∨” button to select temperature by the
programmable setting, setting range: -50°C --- 300°C or -58°F --- 572°F.
 Begin cooking.
TEMPERATURE ALARM BY COOKING
 The cooking alerts will sound when the meat has reached the target temperature.
 In alarm mode,press any button to turn off alarm sound
AFTER COOKING
 Once cooking is finished, remove the probe using an oven mitt.
 Clean the probe with water and a mild detergent.To clean the main unit and sensor, wipe with a damp cloth
°C/°F TEMPERATURE DISPLAY

The temperature is displayed either in °C or °F. To select Fahrenheit or Celsius, In any type except for the
PGM type, press
“∧” button allows you to switch between the individual models.
POWER ON/OFF

The transmitting unit in the working mode, press and hold “TASTE ” button to turn off the LCD display.
 The transmitting unit in the working mode, Automatic turn off the products is not in use after About 30
minutes by
 The transmitting unit in the Shutdown mode, press and hold “TASTE ” button to turn on the LCD display.
BACKLIGHT
 Press any button to illuminate the screen for 30 seconds.
TRANSMITTER TRANSMIT RULES
 If the temperature probe the temperature remains unchanged, the transmitter every 30 seconds at a
temperature signal transmission.
 If the temperature probe the temperature change of more than 1°C, the transmitter will transmit a signal.