User's Manual

RS8735NPT8 2/3
Click --------
Confirm
setting, turn
on alarm
One step
advance
One step
backward
---------
--------- --------- ---------
Alarm setting
Hold -------- ---------
8 steps
advance per
second
8 steps
backward
per second
--------- --------- --------- ---------
Click -------- ---------
One step
advance
One step
backward
Confirm
setting
--------- --------- ---------
Pressure setting
Hold -------- ---------
8 steps
advance per
second
8 steps
backward
per second
---------- --------- --------- ---------
IV. Operations
1. Button function
1) MODE: Click “MODE” key to check alarm.
2) SET:
a. Click “SET” key to check month, day, date and week.
b. Under time or alarm mode, hold “SET” key for 2 seconds to enter into time or alarm setting mode, the
sections being set will flash in the frequency of 1 Hz/second, press “UP” or “DOWN” to choose the value
needed, then press “SET” key to confirm the setting.
3) UP or C/F
a. Under setting mode, click “UP” key to adjust one step (forward).
b. Under standard mode, press “C/F” key to switch °C and °F.
4) DOWN, ▼ or ZONE
a. Under setting mode, click “DOWN or ▼” key to adjust one step (backward).
b. Under standard mode, press “ZONE” key to switch four time zone: current—--zone+1—--zone+2—--zone-1
5) HIS: Under standard mode, clicking to check the air pressure record of past 12 hours.
6) SNOOZE.LIGHT:
a. Under standard mode, press it for 30 seconds backlight.
b. When the alarm is ringing, click it to pause the alarm, and enter 5 minutes of snooze function.
7) MEM:
a. Click it to display MAX value of indoor/outdoor temperature and humidity for 5 seconds. Click once again to
display the Min values for 5 seconds, click again to return to standard mode.
b. When it displays the Max or Min values, hold it key for 2 seconds to clear out the memory of the Max/Min
values, then return to normal standard state.
2. Time settings
1) Under time mode, hold “SET” key for 2 seconds to enter into time setting. The setting sequence is hour ----
minute ---- year ---- the order of Day/Month ---- Month ---- 12/24 format ---- exit.
2) It will exit setting if no key was operated within 20 seconds.
3. Alarm settings
1) Under alarm mode, hold “SET” for 2 seconds to enter into alarm setting. The sequence is hour----minute----exit.
2) It will exit setting if no key was operated within 20 second.
3) Enter into alarm setting, the alarm turns on automatically.