Digital Satellite Receiver GMM Z HD IPTV User Mannual STB Brand: GMMZ, Model: Zi PTV Overview · Support video decode H265/HEVC, MPEG4,MPEG2 SD/HD,
Digital Satellite Receiver H.264/AVC SD/HD, AVS, AVS+, VC1 · Support audio decode MPEG-1 layer I/II, MP3, MPEG-2 layer II, HE AAC. · OSD menu support Thai and English language. · Variable aspect ratio (4:3, 16:9) with Pan Vector or Letter Box. · Tele text and Subtitle Supported. · Capacity for storing IPTV Channel (5000 channels) · HDMI 1.4a (High Definition Multimedia Interface) supported. · USB 2.0 Supported (SW / Channel data transfer/Media play).
Digital Satellite Receiver Rear Panel 1. 2. 3. 4. 5. 6.
Digital Satellite Receiver Remote Control This section describes how to operate the STB using the buttons on the remote controller. The installation of STB enables you to watch a TV program and listen to a radio program. To switch STB from stand-by mode, press the STANDBY key on the front panel or press the POWER key on the remote controller. You can go back to stand-by mode by pressing the POWER key on the remote controller.
Digital Satellite Receiver A. Power Key The Power key is used to switch STB from stand-by mode or go back stand-by mode. B. Mute Key The Mute key is used to turn the sound on/off. C. INFO Key You can see the current channel information by pressing the INFO key. D. iTV Key The iTV key is a hot key for Internet TV under home page. E.USB KEY Press to enter the USB file browser under home page. F. RADIO Key The RADIO key is a hot key for Radio Onliness under home pagess. G.
Digital Satellite Receiver Troubleshooting Problems Solution Does not display any message on Front Panel. Check the main power is plugged into a suitable power outlet. No video and no audio. 1. Check if the wifi is connected correctly. 2. Check if the network is working 3. Check with the box supplier.. Poor picture quality and picture blocks are displayed. Check the wifi network’s quality Remote controller does not work. 1. Check batteries. 2. Position remote control to STB.
Digital Satellite Receiver 1. STB Mechanical STB Mechanical 147mm(Wide)*92mm(Distance)*30mm(High) Clock CPU clock 720MHZ Memory clock 1066 MHZ System Clock: 24/27MHZ Video Decoder Video Decode MPEG-2video(ISO/IEC13818-2)MP@ML; MPEG-4, H.264, H.265 Aspect Ratio 16:9 wide screen, 4:3 letter box, 4:3 pan scan Audio Decoder Audio Decode MPEG-2audio(ISO/IEC13818-3); MPEG-1audio(ISO/IEC11172-3); Sound Mode Left, Right, Stereo.
Digital Satellite Receiver FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible void the user's authority to operate the equipment.
