User Manual
Table Of Contents
- Manual_F15_v1.0_NL
- Installatie
- Telefoonboek
- Berichten
- Gesprekken
- Wekker
- Camera
- Vergrootglas
- Geluidsopname
- Gereedschap
- Multimedia
- Instellingen
- SOS instelling:
- Telefoon instellingen:
- Gesprek:
- Display:
- Profielen:
- 4. Nadat u de Normale modus, Opties, Instellingen hebt geselecteerd, kunt u de Beltooninstellingen instellen, zoals beltoon, berichttoon, volume, ringtype en andere alarmsignalen.
- Beveiliging:
- Verbindingen:
- Bluetooth:
- Snelkiezen:
- Stembegleiding:
- Specificaties
- EU-conformiteitsverklaring
- Manual_F15_v1.0_FR
- Manual_F15_v1.0_EN
- IMPORTANT
- Installing the SD card Insert the memory card into the slot under the SIM card holder, make sure the card faces downwards. Do not scratch or bend the card. The SD card is used as a phone storage. When connect to a computer by a USB cable you can copy ...
- Installing the battery When you use the phone for the first time, charge the battery for 4 hours to achieve the best state of the battery. Remove the battery cover, insert the battery into the battery compartment and replace the cover.
- Manual_F15_v1.0_DE
28
2. Scroll to Bluetooth and Press OK for the below settings:
a) Activate: Select left button Activate/Close to enable or disable bluetooth.
b) Visibility: Select left button Activate/Close to make the phone visible or
invisible to other devices.
c) Pair device: Allow you to search new available devices and pair new devices.
d) Device name: Bluetooth name for current device.
e) Bluetooth file storage, you can select to save the file from the Phone or
Memory Card.
Speed dial:
1. M1/M2/M3 button: Press Menu, scroll to Settings, select Speed dial and press OK,
select Status to set the status On/Off, then select Set numbers and set the
/ / button number from the phonebook, then press OK to save.
Remark: When in standby mode, long press button / / , Popup” No
speed number. Assign now?” press Yes to set number from the phonebook.
2. 2-9 Number: press OK, select Status to set the status On/Off, then select Set
numbers and set the 2-9 numbers from the phonebook, then press OK to save.