manual

PAY
TV
Auto Program
Turn on your device.
Press the appropriate button for the device you
wish to work on ( o ); the LED will flash
briefly.
Keep holding both buttons and until the LED
stays lit; release the buttons. FIG.3
Press the 0 button followed by the type of device
selected (1 for TV, 4 for Pay TV), the LED will flash
every 3 seconds approximately. FIG.5
When the device turns off press any button on the
keypad; the LED will flash twice as confirmation.
Check that everything is working properly, if all
functions are not present, repeat
the Auto Program process.
Find the brand of your set in
www.jollyline.it/cf.html