User's Manual


LightDescription:
Theindicatorlightturntoblueandredwhenpairing■ 
Flashingoncerapidlyin2secondwhenco■ nnecting
Flashingonceslowlyevery2secondwhenwaitingforconnection■ 
Theredindicatorflashing3timesevery2secondwhenpowerstatusislow.■ 
Thelightisred
whencharging.Bluetoothheadsetisclosed.■ 
TheredlightturntoBluewhenchargi■ ngcompleted
PairtoyourMobilePhone:
1.ThedistancebetweentheBluetoothheadsetandyourmobile phonewouldbebetterwithin1
meterwhenpairing,thecloserisbetter.
2.Ensuringtheheadsetisoff.
3.Pressingstill theMultifunctional Button, sustain6 seconds, fristthe blue light glimmer,until
youseethebluelightand
redlightglimmers,thenreleasethebutton.
4. Set your Bluetooth phone to "discover" the headset by following your phone's instruction
guide.Thestepsinvolvegoingtoa"setup","connect",or"Bluetooth"menuonyourphoneand
thenselectingtheoptionto"discover"aBluetoothdevice.
5.Yourphone willfind the"S10"headsetandaskifyouwantto pairwithit.Confirmingthis by
pressing"yes"or"ok".
6.Enterpassword"0000",thenpress"yes"or"ok".Nowmostphoneswillnotneedit.
Note: The pairing generally takes about 60 seconds. If
 unsuccessful, the blue indicator light
flashesslowly,andthenyouneedtoreattemptpairing(seesteps4‐6).Turningofftheheadset
bypressingthebuttonsustain4seconds.

ImportantandNoted:
1.Beforecharging,pleasecheckthechargersuitforBluetoothheadset.
2. Please used original battery and original charger, if you used other charger and charging,
maybeyouwilldamageheadset.ThatisDANGEROUSandYouhaveviolatetheplanregulation.
3.Bluetoothheadset‘sbatteryisLi‐ionbattery
inside.Don’ttakeitout.Protectthegoodsagainst
spoilage.
4. Keep your headset off when you don't use it. You need to chargingeach month, if you don’t
useit.
5.Don’tthrowitintofire.

AnsweringaCall
When you hearthe ringtone, presstheMultifunction Button onceor pressthebutton onyour
phone's keypad, but you may then need to transfer the call to your headset by pressing and
releasingtheMultifunctionButtononce(dependingonyourphone).

EndingaCall
PressandreleasetheMultifunctionButtononceorendcallfromphonekeypad.