User's Manual

■ The red light turn to Blue when charging completed
Pair to your Mobile Phone:
1. The distance between the Bluetooth headset and your mobile phone would be better within 1
meter when pairing, the closer is better.
2. Ensuring the headset is off.
3.Pressing still the Multifunctional Button , sustain 6 seconds , frist the blue light glimmer, until
you see the blue light and red light glimmers , then release the button.
4. Set your Bluetooth phone to "discover" the headstet by following your phone's instruction guide.
The steps involve going to a " setup ", " connect ",or "Bluetooth" menu on your phone and then
selecting the
option to "discover" a Bluetooth device.
5. Your phone will find the "AVF2" headset and ask if you want to pair with it. Confirming this by
pressing " yes " or "ok".
6. Enter password "0000", then press "yes" or "ok".
Note: The pairing generally takes about 60 seconds. If unsuccessful, the blue indicator light
flashes slowly, and then you need to reattempt pairing (see steps 4-6). Turning off the headset by
pressing the button sustain 4 seconds.
Important and Noted:
1. Before charging, please check the charger suit for Bluetooth headset .
2. Please used original battery and original charger, if you used other charger and charging, maybe
you will damage headset. That is DANGEROUS and You have violate the plan regulation.
3. Bluetooth headset ‘s battery is Li-ion battery inside. Don’t take it out. Protect the goods against
spoilage.
4. Keep your headset off when you don't use it. You need to charging each month, if you don’t use
it.
5. Don’t throw it into fire.
Answering a Call
When you hear the ring tone, press the Multifunction Button once or press the button on your
phone's keypad, but you may then need to transfer the call to your headset by pressing and
releasing the Multifunction Button once(depending on your phone).
Ending a Call
Press and release the Multifunction Button once or end call from phone keypad.
Answering or Rejecting a Call when Listening to Music:
If there is ring tone of incoming call when you are listening to music, in your phone or PC or other
Bluetooth enabled devices, press still either "Power ON / OFF / Answer a call" button for 2
second
to reject the call or press the Multifunction Button to answer the call.
Multimedia Feature:
If the pairing is successful with the phone which supports 1.2 , A2DP profile,
it allows you to enjoy the real stereo sound music from your phone. When
there is an incoming call, the headset will automatically switch to phone
mode and resume to music mode when the call ends.
This feature works same with PC.