User's Manual

For More Info : www.gg2002.com
360
BluetoothHandsfreeKit
The Handsfree Kit supports Multipoint Technology which allows you to use it
simultaneously with two different Bluetooth mobile phones.
Put Handsfree Kit in pairing mode to pair with your aditional Bluetooth devices.
What is MobileConferencing™ ??
Press the MFB I and the MFB II at the same time during a phone
conversation to enter MobileConferencing™ mode.
MobileConferencing™ is suitable for open communication by
all participants in the room.
During MobileConferencing™ , the 2 built in microphone provide
360 coverage for a 15’ x 15’ room.
Therefore, everyone voice will be pick up and transmitted over the other end.
And you can enjoy quality phone call without worrying about echo noises
at the background.
Multipoint Technology
Put Handsfree Kit In Pairing Mode
Method 2
When your Handsfree Kit is not turn on, long press
the MFB II until the Red and Blue light alternate.
Drop the Bluetooth connection from your
connected devices by pressing the MFB II
and the Volume Down Button at
the same time.
How To Go Into Standby Mode??
1.
Turn the Handsfree Kit off and turn it on, the Handsfree Kit will connect to both
of your mobile phones automatically.
2.
Establish the Bluetooth connection via your mobile phone.
Please refer to your mobile phone user manual to connect your device.
How To Connect To Two Mobile Phone Simutaneously??
LED Indicator Chart
1.
Short pree the MFB I to hold
the first call and switch to the
second call from the other phone.
Long press the MFB I to hang
up the first call and switch to the
second call from the other phone.
2.
How to Answer a Second Call While Talking On The Phone??
Short Press Long Press
Note 1 : If you choose not to answer the second call, and you have voice mail on the second phone,
the call will go to voice mail.
Note 2 : Not all Bluetooth mobile phone support Multipoint Technology.Interoperability between the
Handsfree Kit and all Bluetooth enabled products is not guaranteed.
Note : “Standby Mode” means Handsfree Kit is on but not connected to any device.
“Connected Mode” means Handsfree Kit is connected to device but not on a call.
Power on
Power off
Pairing mode
Reset
Standby mode
Connected mode
Talking /IsolationMode™
MobileConferencing™ mode
Status LED Indication
/4 seconds
/4 seconds
/4 seconds
Blue indicator blinks twice
Red indicator blinks twice
Red & Blue indicators blink
twice
Red & Blue indicators
blink by turns
Blue indicator blinks once
every 4 seconds
Blue indicator blinks rapidly
2 times every 4 seconds
Blue indicator blinks rapidly
3 times every 4 seconds
Blue indicator blinks rapidly
3 times every 4 seconds and
Green indicator steady on
Outgoing call
Charging
Charging complete
Low Battery
Incoming call
/1 seconds
steady on
off
/1 seconds
Blue indicator blinks
once every second
Red & Blue indicators blink
once every second
Red indicator steady on
Red indicator off
All Blue indication will change
to Red
/4 seconds
steady on
Method 1
During standby mode, (Blue light blinking 1 time
every 4 seconds) long press the Volume Up Botton
until the Red and Blue light flash alternatly.
+