Users Manual

Note:

• If the printer you need is not shown in the list, please click "Refresh" button to search

again. If it is not found, please check if the printer and computer are in the same network.

(Please see Chapter 5.3 for how to check).

• When the printer IP address changes under printer driver installed with host ID , you

can also directly print without re-installing the driver. If you need to install the printer

driver with the host ID, please check the option "Install the printer in the list with host ID".

7. After the installation, click "Print &Test Page" button. If your printer prints the test page

successfully, it means that you have installed the driver correctly.

3.1.1.3. Method III: Connect the printer via wireless network(applicable to Wi-Fi

models)

Please check if the printer is connected with wireless network when installing the printer driver

software. If disconnected, please install it with reference to Chapter 3.1.1.3.1. If connected,

please install it with reference to Chapter 3.1.1.3.2.

Note:

• You can print "Network configuration page" to confirm printer network connection

status to see if printer is connected with network (Please see Chapter 9.4 for how to

print).

3.1.1.3.1. The printer is not connected with wireless network(applicable to Wi-Fi

models)

3.1.1.3.1.1. Configure wireless network via USB cable and install driver

Since some computers are not provided with wireless network function, this section is divided into

"Connect computer to router via Wi-Fi" and "Connect computer to router via wired connection" to

introduce installation process.

I．Connect computer to router via Wi-Fi

1. Computer is already connected to router via Wi-Fi.

2. Connect the printer to computer via USB cable, then power the printer on.

3. Place the attached installation CD in the computer CD-ROM:

• Windows XP system: automatically run the installation procedure.

• Windows 7/Vista/Server 2008 system: Pop up "Autoplay" interface, click “Autorun.exe” to run

the installation procedure.

• Windows 8 system: When the " DVD RW driver" window pops up from the right top corner of

computer desktop, click anywhere in the pop-up window, then click "Autorun.exe" to run the

installation procedure.

• Windows 10 system: When the "DVD RW driver" window pops up from the right top corner of

computer desktop, click anywhere in the window, then click "Autorun.exe" to run the installation

procedure.

Note:

• Some computers may be unable to auto play the CD beacase of system configuration.

Please double click "Computer" icon, find "DVD RW driver", then double click "DVD RW

driver" to run the installation procedure.

4. Click on the "I agree" button on the right buttom corner after reading the license agreement and

enter into driver installation interface.

5. Click the "One-click installation" button in Method III to install driver software.