Users Manual

II．Connect computer to router via network cable

1. Connect computer to router via network cable.

2. Connect the printer to computer via USB cable, then power the printer on.

3. Place the attached installation CD in the computer CD-ROM:

• Windows XP system: automatically run the installation procedure.

• Windows 7/Vista/Server 2008 system: Pop up "Autoplay" interface, click “Autorun.exe” to run

the installation procedure.

• Windows 8 system: When the " DVD RW driver" window pops up from the right top corner of

computer desktop, click anywhere in the pop-up window, then click "Autorun.exe" to run the

installation procedure.

• Windows 10 system: When the "DVD RW driver" window pops up from the right top corner of

computer desktop, click anywhere in the window, then click "Autorun.exe" to run the installation

procedure.

Note:

• Some computers may be unable to auto play the CD beacase of system configuration.

Please double click "Computer" icon, find "DVD RW driver", then double click "DVD RW

driver" to run the installation procedure.

4. Click on the "I agree" button on the right buttom corner after reading the license agreement and

enter into driver installation interface.

5. Please click on the "One-click installation" button in Method III and install driver software.

Note:

• You can put your mouse cursor in the "One-click installation" button to check the popup

information in order to confirm if the current printer is the one you need to install through

IP address before you click the button.

• You can check the printer IP address through "Network configuration page" (Please

see Chapter 9.4 for how to print).