User's Manual

G-scan2 User Manual
183
Pressing the left mouse button after placing the mouse pointer on any particular coordinate on the
graphs turns the Cursor A on, which appears are a dotted vertical red line.
Time elapsed until the Cursor A point is indicated in the top of the screen as “Cursor Time: 00:02:09”
Also the data readings of each parameter at the Cursor A point are displayed on the right side of the
screen as shown above.
The Cursor B appears as the dotted blue vertical line when the right mouse button is pressed, and
disappears when the button pressed again as shown in Fig. 13.
The time difference between the cursors is indicated in the top of the screen – “Two cursor: 1:22.3sec”.
The readings of each parameter at the moment cursor A is pointing are displayed on the right side of
screen in blue bold letters.
Max and Min values are indicating:
With cursor A only: The lowest and the highest points that appear on the current screen.
With cursor A and B: The minimum and the maximum values between the Cursor A and Cursor B
points.
* Selecting the button resets the min/Max values to the reading of the first frame.