User's Manual

G-scan2 User Manual
154
If G-scan2 is locked, it is not recoverable unless the G-scan2 base unit is returned to the authorized
local distributor.
The G-scan2 needs to be examined and then unlocked by inputting the unlock code which is provided
by GIT HQ in Korea. The process is not subject to warranty service. If you have purchased the G-
scan2 from overseas or if you have no authorized distributor in your region, you will be required to
return the base unit back to Korea, and you are requested to pay the whole round trip cost.
When serial number information contained in the G-scan2 main board is found not in accordance with
information contained in the SD card, G-scan2 pops up the warning message as below and will not
operate any more. The only option available when G-scan2 shows this message is turning off by
selecting OK.
“Invalid Serial Number” Lock