User's Manual

190
4.7. Network Printer Setup
G-scan2 PC Utility Software
AA-4-7. Network Printer Setup
Utilizing the onboard WiFi module, G-scan2 is capable of printing the captured image through the
network printer that is connected to the PC where the PC Utility program is installed.
Please observe the three conditions below:
1. The PC that the PC Utility is installed needs to be logged on to the wireless network.
2. The WiFi module of G-scan2 needs to be activated and logged on to the same Wireless network.
3. The printer must be connected to the PC as the default printer.
Select [Network Printer Setup] button from the G-scan2 PC Utility Program main menu as below.
Then select among [AutoPrint] and [Deactivate].
AutoPrint
Allows G-scan2 to detect the printer connected to the PC automatically so that it can print out the
captured images when commanded by the user.
Open Image Viewer
Deactivates the direct network printing function. Instead of printing, G-scan2 runs the Image Viewer
and shows the captured screen on the LCD.