User's Manual

G-scan2 User Manual
92
4. Actuation Test
Actuation Test is a function that activates the active parts on the output side of the control unit
such as injector, fans and valves, and examines the operation of the active parts and the related
circuits.
Select the test item from the upper left window, observe the test conditions described on the
upper right window and get the vehicle’s condition in compliance then select “Select” button
in the bottom or press [F1] key.
Control On/Off or adjust the values up and down using the buttons and keys and check the
response of the selected active parts and the vehicle control system’s reactions by
monitoring the live data provided in the lower half of the screen.