User's Manual

G-scan2 User Manual
32
2.6. Connecting to the vehicle
Getting Started with G-scan2
AA-2-6. Connecting to the vehicle
Connecting the main DLC cable to the base unit
Connect the DLC main cable to the G-scan2 D-sub connector, and secure the connection by
fastening the 2 main screws as well as the 2 vertical screws. Do not apply excessive power
when fastening the screws.
Connecting to the Vehicle
Extend the DLC main cable connected to the G-scan2 to the vehicle side DLC socket.
Different types of diagnostic adapter may be used for the old models or the commercial vehicles.
If the vehicle is not OBD2 / EOBD compliant, identify and attach the matching adapter, then
connect it to the vehicle side socket.
Warning
Do not hold the G-scan2 base unit by the main cable when carrying the
product. Make sure to hold the base unit or the hand strap