User's Manual

G-scan2 User Manual
9
 Do not put the SD card upside down when inserting to the base unit
 Use only the AC/DC adapter that is supplied with G-scan2 when supplying power from AC source
 Storing the rechargeable battery in a hot place may shorten its lifetime
 In case battery liquid gets in the eyes, do not rub and wash them with fresh running water. And
see the doctor immediately
 Use the stylus pen supplied as the basic accessory of G-scan2 when touching the screen. Use of
sharp or pointed object may cause serious and irrecoverable damage to the touch screen film and
the LCD
 Keep LCD away from liquid or splash of water
 Liquid Crystal may run from the broken LCD. Do not touch the LCD when it is broken, and be
careful not to get liquid crystal in the eyes or mouth. If contaminated by liquid crystal on the skin,
remove them immediately using soap and running water
 Use soft fabric and alcohol to clean the surface of the LCD
 Do not use volatile solvents other than alcohol when cleaning the LCD
 Perform Touch Screen Calibration when the touched point is not coordinated correctly. The touch
screen needs zeroing when used for an extensive period of time