User's Manual

G-scan2 User Manual
143
Simulation Function
G-scan2 can actively send out the electric signals to the vehicle’s sensor or actuator circuit for in-
depth diagnostic purposes.
1. Voltage Output
Sends out the continued voltage signal to the circuit through the VMI channel B, and the voltage
level can be manually adjusted by the user. Mainly used for checking the sensor signal wire.
Please observe the instruction displayed in the lower half of the G-scan2 screen.
: Lowers the output voltage by 1V
: Raises the output voltage by 1V
: Lowers the output voltage by 0.1V
: Raises the output voltage by 0.1V
: Stops the voltage output