User's Manual

User’s Manual
- 102 -
1) Select the Actuation Test item
At the left zone of “Actuation Test” screen, select using stylus pen on
the touch screen or move the cursor using direction buttons
.
2) Check and setup the Actuation Test condition
After checking the Test Lap Time and Test Condition at the right zone
of “Actuation Test” screen, setup them according to the condition of
the testing vehicle.
3) Start the Actuation Test
Select
or to start the test.
4) Check the Actuation Test result
On the right zone of the “Actuation Test” screen, the test result
(Failure or Success) will be shown.
5) Stop the Actuation Test
Test which lap time is
determined:
After completing test time, the test will be
terminated automatically.
Test which lap time is
not determined:
After checking the result, select
or
to terminate the test.
Note:
Even it is the test which lap time is determined, press the
or
during test, then it will be terminated.
How to execute the Actuation Test