User's Manual

User’s Manual
- 109 -
How to ECU Upgrade
How to use the Auto Upgrade
When the ECU of relating vehicle has the update event not applied, the
auto update is conducted in the Auto Mode.
1) On the main screen, select
, then screen will be
changed to the event selection screen as in the following figure, and
all events applied to the vehicle are shown. If there is no event
applied to the ECU of the vehicle, it is not changed from the main
screen to the event selection screen.
<Figure 2: ECU Upgrade Screen>
Notice:
After selecting the event to be upgraded, select
at the
bottom of the screen to perform the update after checking the
Technical Service Bulletin.