User's Manual

User’s Manual

- 114 -

How to conduct the Manual Upgrade

The manual mode is the ECU upgrade mode used when event is applied

in force even there is no event to be applied to the ECU of the vehicle.

Unlike the auto mode, in order to apply the event to the ECU of the

vehicle, the user directly selects the event and enters the password.

1) On the main screen, select

, then the screen will

be changed to the screen as shown in following figure and all events

applied to the vehicle are shown. If there is no event applied to the

ECU of the vehicle, it is not changed from the main screen to the

ECU upgrade screen.

Caution:

After selecting the event to be upgraded, select

at the

bottom of the screen to perform the update after checking the

Technical Service Bulletin.