User's Manual

User’s Manual
- 120 -
The rechargeable battery and TPMS module embedded into G-scan are
the optional items.
The optional items should be installed to the G-scan according to the
method described in the manual. Otherwise, it may cause defects on the
product.
Battery & TPMS Pack Installation
1) Loosen the Package mounting bolts from the 4 points shown in
<Figure 1> with ①.
2) Disconnect the body module and Pack to the direction ② as shown in
<Figure 1> carefully.
(If excessive force is applied, the product may be damaged.)
3) Install the Battery Pack (or TPMS Pack) as the same figure of the
previous Pack condition.
4) Tighten the 4 mounting bolts loosened at step 1).
<Figure 1 Position of the Pack Mounting Bolt>
Optional Item Installation and
Expenditure Exchange