User's Manual

User’s Manual
- 23 -
Power Supplying
Basic Use of G-scan Module NO: A-02-001
1. Supply external power
There are 4 methods for supplying external DC power to the G-scan.
z With DLC cable
z From the cigarette lighter terminal in cabin
z From the battery of vehicle
z From the AC/DC adapter
2. Power supplying from embedded rechargeable battery (Option)
z When using wireless communication (LF/RF) of TPMS
Caution
<Figure 1: Low Voltage Warning for Rechargeable Battery>
z The <Figure 1> is the message warning the low battery. If you see
this message, supply the external power immediately.
z Otherwise, the G-scan will be turn OFF automatically.