User's Manual

User’s Manual
- 25 -
Description of Power Supplying Method
Power supplying with the DLC cable
The vehicle of which diagnosis connector terminal is the 20-Pin
connector or which is satisfying the OBD-II communication regulation
can be supplied the electric power from the DLC cable without any
additional power line.
Note:
The DLC connector, in general, is located at the lower part of the
driver’s front panel. This location may be different somewhat, please
check the correct location before connecting.
From the cigarette lighter in the cabin
Using the cigarette lighter power cable purchased as a basic item with
the G-scan, the electric power can be supplied.
Note:
When using the cigar cable, the power will be cut during ignition of the
engine. Therefore, for the G-scan without rechargeable battery, the
power will be OFF. If your G-scan does not have rechargeable battery
and you diagnose vehicle relating to the ignition of engine, use other
power supplying method.
Module NO: A-02-001