User's Manual

User’s Manual
- 26 -
From the vehicle battery
When power is supplied form the vehicle battery, the electric
power can be supplied without interruption.
Cautions at connecting the vehicle battery
 Do not contact the battery power line to the driving part in the
engine room.
 Connect correct power lines to the battery terminals.
From the AC/DC adapter
Using the AC/DC adapter purchased as a basic item with the G-
scan, the electric power can be supplied to the G-scan.
When updating the G-scan, use the AC/DC adapter for supplying
stable power to the G-scan.
Warning
Use only the AC/DC adapter supplied by GIT for the G-scan. GIT
has not responsibility for the damage by different kinds of AC/DC
adapter.
Caution
 At communicating with vehicle (for all vehicle diagnosis function
with DLC cable), the vehicle battery should be connected always.
 For updating the G-scan, connect the AC/DC adapter for supplying
the stable power.
Module NO: A-02-001