User's Manual

User’s Manual
- 27 -
Power ON/OFF
Basic Use of G-scan Module NO: A-02-002
<Figure 1: Location of the Power S/W>
Power ON/OFF Method
Power ON
1) Check the power supplying condition of G-scan.
Notice:
For the details of power connection to the G-scan, refer to “Power
Supplying” of the “Basic use of G-scan”.
2) Press the “Power Switch” shown in <Figure 1> until the DLC LED and
OPTION LED located at upper right of the G-scan are turn from amber
to green. (It requires about 0.5 seconds..)