User's Manual

User’s Manual
- 31 -
Note:
As the CALIBRATION of the touch screen may be changed by the
temperature variation or passing of the time, reset the CALIBRATION of
the touch screen at the “Setup” in the Configuration.
Notice
For the details relating to the power ON/OFF, refer to the “Power
ON/OFF” in the “Basic Use of G-scan” <Module NO: A-02-002>.
z POWER LED Lighting Condition
Charging Charged
With DC power LED (Red) ON LED (Green) ON
Battery Pack
Installation
Without DC
power
LED OFF LED OFF
Tips
If the battery pack is not installed, when the external power is connected,
the Power LED lights the Green up.
Notice:
For the details of the power supplying, refer to the “Power Supplying” in
the “Basic Use of G-scan” <Module NO: A-02-001>.
Module NO: A-02-003