User's Manual

User’s Manual
- 36 -
Description for the Components of the Initial Screen
Configuration and Help
①
ConFigure or proceed to the “Setup”, “User
Information”, “Software version” or “Self-diagnosis”
②
Support the Help for using this product.
Model Selection
③
Select the model and system for diagnosing.
* The selected system is shown in the window right
side of the “System Select” button.
Diagnosis Menu
④
Show the fault code on the screen by
communication with the selected vehicle system.
Show the additional fault codes by further
communication.
⑤
Check the data of input/output devise of ECU
installed at the current vehicle by the communication
with the selected vehicle system.
⑥
Support supplementary vehicle S/W function except
the diagnosing functions (DTC, Current Data,
Actuation Test).
⑦
Support the ECU upgrade.
⑧
Diagnose the vehicle applied with OBD-II COM
program.
⑨
Recording the travel data, analyze the data.
⑩
Search the fault codes of vehicle systems setup in
system selection multiply at the same time without
re-selection of system.
⑪
At connecting GDS VMI (expanded install item), the
multi-meter, oscilloscope, simulation test functions
are possible.