User's Manual

User’s Manual
- 62 -
STEP-A Test
The purpose of STEP-A test is for diagnosing the specific
communication circuit of the G-scan. During proceeding with this test,
the power is supplied by the DLC cable and the Self Test adapter. For
the details of Self Test adapter, refer to the ‘Connecting the Self Test
adapter’ in the ‘Basic Use of G-scan’.
<Figure 3: Self Test A Screen>
Method for proceeding with the test is as follows.
1) Connect the DLC cable to the G-scan and connect the Self Test
adapter to the other end of DLC cable. Connect the adapter to the
OBD-II connector of the vehicle.
2) Turn the power of G-scan ON and change to the ‘Self Test’ item of
configuration.