User's Manual

User’s Manual
- 66 -
The test result messages are explained below:
Good: You may still need to test cable integrity by wiggling to test for
intermittent connections.
** If the test results indicate “Good” and the vehicle communication
continues to fail after the self-test adaptor is removed, verify that the
communication problem is not vehicle related; contact the authorized
service provider if necessary.
Failure: When the test result in self-diagnosis STEP-A are good but the
result of STEP-B is failure, then there is a high possibility that the 16-pin
Main DLC cable (P/No: G1PDDCA001) is inoperative. Contact the
authorized service provider.
Module: A-02-006 (p.10)