User's Manual

User’s Manual
- 73 -
5) Option Selection
<Figure 6: Option Selection>
6) Multiple System Selection
When the number of the System to be diagnosed is multiple, press the
or with cursor locating at “Selected” zone to move to
the “System” zone and repeat from 4) to select again.
Notice:
During selecting system, when it moves to upper zone than “System”
zone (“Model”, “Year”, “Engine” zones), all previously selected
system selection will be released.
1
,
Set the cursor on the system option of model to
be diagnosed.
2
,
The system option of model to be diagnosed is
registered in the “Selected” zone.