User's Manual

User’s Manual
- 80 -
Introduction of Fault Code Searching Screen
<Figure 1: DTC Analysis Screen>
General Description of fault code are shown.
As the Freeze Frame function, the input/output data of the control
module relating to the saved fault code when the fault code is
occurred.
* According to the specification of control module, function
supporting is different.
Delete all fault codes saved at the control module
Delete the fault code selectively among the fault codes shown by
the fault searching.
* According to the specification of control module, function
supporting is different.
Show the “Fault Detail Information”.
* According to the specification of control module, function
supporting is different.
Change to the dual mode and use other supplementary
information function.
Note:
z
When all items are not shown in one screen due to a lot of fault codes, move the
scroll bar at right side using the stylus pen or the arrow keys to
find item you want.
z If you want to back to main screen, press the or at the right upper
side in <Figure 1>.