Digital PDI User’s Manual 1
Before Use Before using Digital PDI, read the instructions thoroughly for proper operation. This manual contains the basic instructions of Digital PDI. The instructions provided by this manual is subject to change without prior notice. The several features of Digital PDI application includes transfer data over cellular network which may result in additional fees. GIT has no liability for the additional fees from the usage of cellular network.
CAUTION This indicates incorrect handling may lead to injury or damage to property. Under certain conditions more serious consequences may result. Keep liquids and other contaminants away from the HDP. Do not drop the HDP. Do not place any objects (tools, manuals, etc.) on the HDP. Properly store all components when not in use.
Introduction Thank you for purchasing the Digital PDI. Read the instructions thoroughly for proper operation of your Digital PDI. Copyright This Manual is copyrighted by Global Information Technology Co., Ltd. All rights reserved. No part of this manual may be reproduced in any form without the prior written permission of Global Information Technology Co., Ltd. No patent liability is assumed with respect to the use of the information contained herein. ⓒ2016 Global Information Technology Co., Ltd.
Introduction 5
Hardware HDP Identification and Functions LED Status Indicator Indicates status. the power, communication, Mini USB Connector USB connector for production.
HDP Specifications Item CPU Memory External Serial Flash Memory Operating Voltage Specifications ARM 32-bit Cortex™-M3 (STM32F105RCT6) @ 72MHz Flash Memory 256KByte, SRAM 64KByte 8MByte 7V ~ 18V Operating Temperature -10℃ ~50℃ Storage Temperature -20℃ ~80℃ Current Consumption Typical 120mA @ 12V Standby 3mA 이하 @12V Bluetooth Protocol Bluetooth 3.
HDP Connection The HDP is used for inspecting the vehicle systems. The HDP and Digital PDI is paired via Bluetooth communication and must be set up as figure below. 준비 Notice HDP must be connected to OBD-II connector of vehicle.
Screen Layout and Basic Operation Screen Layout and Basic Operation • Registration 1 2 3 4 5 1 VCI S/No. Type HDP serial numbers. 2 Dealer Code Type Dealer code. 3 Mobile S/No. Type mobile serial numbers. 4 Mobile Mac Mobile MAC address is automatically filled out. 5 OK Button Checking the validation with server once all items are filled out and tap [OK] button.
• Login 1 2 3 4 5 1 ID Type ID of inspector. 2 Password Type password of inspector. 3 Save ID Remembers the ID of inspector when checked. Login Button Checking the validation with server and displays the main page once ID and password is filled out and tap [Login] button. Keyboard Onscreen keyboard that provided on OS.
• Digital PDI Main Screen 1 2 3 4 5 1 Top Menu Switch menu between vehicle inspection and result. 2 Logout Button Logging out from the Digital PDI of current inspector. 3 Inspector Information Shows the information of inspector. 4 VCI Status Shows connection status of connected HDP that paired with mobile. 5 Refresh button Searches connected HDP that paired with mobile.
Pairing between HDP and Digital PDI 1 2 1. Tap the settings located on top menu of Digital PDI main screen. 2. Tap the ‘VCI Paring’ on list. 4 3 3. The list of paired VCI is displayed on upper menu. It will search for the available devices when you tap the [Scan] button. 4. Select VCI that you want to use.
6 5 5. Type the PIN code of selected VCI when Bluetooth paring popup is displayed and tap [OK] button. 6. The selected VCI is added to paired VCI list.
Appendix 14
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules.
Disposal of Old Electrical and Electronic Equipment WEEE (Waste Electrical and Electronic Equipment) symbol shown in [Figure 1] is indicated on the back of the VCI main module. Please follow the regulation guide for disposal of Waste Electrical and Electronic Equipment. Fig. 1.
