[ TPMS B/T Adapter Manual ] TPMS B/T Adapter
● DESCRIPTION 1. TPMS B/T Adapter is adapter for B/T commnuication TPMS with PAD. 2. Connect the TPMS and TPMS B/T Adapter like as a picture for use. 3. TPMS B/T Adapter is not used without TPMS. 4. For the power ON, press the RED button at top right side of TPMS. - Red LED of top left side of TPMS is on, And, Red LED is on at top left side of TPMS BTA 5. For the power OFF, Press the RED button about 3 seconds at top right side of TPMS.
● TPMS B/T Adapter ITEM Specification POWER DC 3.7V Temperature Active Temperature Power Consumption Power Charge DC 7V – 35V Main CPU Processing speed CPU Internal Memory Volume Interface IC BLUETOOTH Display • Supply power from LI-ION BATTERY • BATTERY : 1,000mA 653745 - Charge : 0~45℃ - Discharge : -20 ~ 60℃ • Active : 0 ~ 40℃ • Status : Active ( Max. 180mA ) • Input power from DC-JACK pin • When TPMS connect to TPMS_BTA Both able to be charged.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Changes or modifications not expressly approved by the party responsible for compliance Could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
